+
  • md.jpg

A mining company in Heihe purchases an MDP450-95X8P wear-resistant, self-balancing multistage pump.


Industry: Mining industry

Project Address: Heilongjiang Province

Pump flow rate: 450 m³/h

Pump head: 760 m

Extraction medium: Clear water

Pump model: MD450-95X8P

Pump type: Self-balancing multistage centrifugal pump


Inquire Now

Project Introduction

A mining company in Heihe purchases an MDP450-95X8P wear-resistant, self-balancing multistage pump.

  A certain mining company in Heihe is a long-established iron ore enterprise in the local area. The entire water supply for both the mining area and the residential zone relies on an old pumping system. However, starting last year, the old pumps have become increasingly unreliable— their lift capacity can no longer meet the demands of the deep mining areas, and the higher-level residential zones frequently experience water outages. Moreover, the sand and silt carried in the water keep clogging the pumps, requiring them to be disassembled and repaired several times each month. Not only does this disrupt production, but it also incurs substantial repair costs.

  The mine contacted several pump manufacturers before finally partnering with a company that specializes in mining pumps. The manufacturer’s technical staff spent a week on-site, thoroughly assessing the situation: to deliver water to the mining area at a depth of 300 meters—and accounting for pipeline losses—the pump’s head must be sufficient. Moreover, since the water contains about 10% silt, a standard pump simply wouldn’t have adequate wear resistance. After careful consideration, they recommended... MDP450-95X8P Wear-resistant, Self-balancing Multistage Pump 。

[For more information on MD self-balancing multistage pump models, specifications, selection guidelines, and quotation options, please click the image above to learn more.]

  This pump is tailor-made for mining applications: its impeller is made of a high-chromium, wear-resistant material that’s far more durable than those used in older pumps. Its self-balancing design eliminates the need to frequently replace balance discs, significantly reducing maintenance hassle. With a rated head of 760 meters, it easily provides sufficient lift to reach the mining areas, and its flow rate is ample enough to meet the entire mine’s water demand. Even more convenient, the pump can be disassembled into smaller sections for transport underground—perfect for installation in tight spaces—without requiring major modifications to the pipeline system. It can be fully installed within just one week.

  After the system was put into operation, no one at the mine complained about water shortages anymore—the water supply to both the mining area and the residential zone has become remarkably stable. Having been in operation for nearly half a year now, we’ve only had to replace the seals once, and the pump hasn’t been clogged with silt or sand since then. The equipment hardly requires any maintenance at all. We’ve also saved significantly on electricity costs—previously, even running the old pumps at full capacity wasn’t enough to meet demand, but now, with this variable-frequency drive control system that adjusts the speed according to actual needs, our monthly electricity bill is nearly 20,000 yuan lower than before.

  Old Wang from the mine’s equipment department said, “We’ve chosen the right pump! Not only has it solved our major water supply problem, but it’s also saved us on maintenance and electricity costs. The manufacturer’s after-sales service is top-notch—just give them a call if there’s any issue, and they’ll send someone right away. It’s really reliable!”

Inquire Now

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.