Having 26 series -312 varieties - over 1000 pump models

Focused on water pump research and development manufacturing for 36 years

Free training for operation and maintenance personnel/free installation guidance/free provision of installation drawings

QS-type water-filled submersible well pump



classification:

Submersible pump

keyword:

Horizontal Single-Stage Fire Pump

Product overview Product parameters Why choose us? Frequently Asked Questions

Product Overview

The QS-type water-filled submersible well pump (hereinafter referred to as the “pump”) consists of two main components: a pump and an electric motor. The pump is located at the upper part of the pump and features a centrifugal design. The electric motor is situated at the lower part of the pump and is a water-filled three-phase asynchronous motor. In the water-filled motor, the stator windings and iron core are directly immersed in water, providing excellent cooling performance and eliminating pollution. This breakthrough overcomes the drawbacks of other pumps—such as water leakage through O-rings and mechanical seals into the motor cavity—and significantly enhances the pump’s operational efficiency.
 Flooded-type submersible pump for wells
 
QS-type submersible well pumps are widely used in agricultural irrigation and drainage, sprinkler irrigation, underground water lifting, domestic water supply, water supply and drainage systems for industrial and civil buildings, as well as water diversion in hilly and mountainous areas and drainage in low-lying regions.

Product Parameters

Meaning of QS-Type Water-Filled Submersible Well Pump Model and Operating Conditions

QS-type water-filled submersible pump

For example: QS20-40/2-4

QS—Water-Filled Submersible Pump

20 - Flow rate (m³/h)

40 - Head (m)

2nd-order series

4-Power (kW)

Working conditions:

1. Power supply: A three-phase AC power supply with a frequency of 50 Hz and a voltage of 380 V (with an allowable deviation of 5% to 10%).

2. Water Source: Generally, non-corrosive clear water with a sand content no greater than 0.02% and a pH value between 6.5 and 8.5. The temperature of the extracted water should not exceed 40°C.

3. Installation: The electric pump must be fully submerged in water for operation, with a submergence depth ranging from no less than 0.5 meters to no more than 5 meters.

 

Application Scope and Features of QS-Type Water-Filled Submersible Well Pumps

The QS-type submersible pump should be able to operate continuously and normally under the following conditions:

1. Before using the QS-type water-filled submersible pump, first loosen the drain bolt and fill the pump’s inlet port with clean water (tap water or generally clean lake or river water) to flush out any rust inside the motor cavity, thereby extending the pump’s service life. Once clear water starts flowing out from the drain hole, tighten the drain bolt again and gently shake the pump to expel any air trapped in the windings, ensuring that the motor cavity is completely filled with water. Then, tighten the inlet bolt securely and verify that the insulation resistance is no less than 5 megohms.

2. When the QS-type submersible electric pump for wells is not in use, drain the water from inside the motor and store it in a dry, well-ventilated place. For next use, follow the above-mentioned procedures again. (FP blocking screw.)

3. The working medium shall be non-corrosive clear water with a sand content by volume not exceeding 0.10%, a pH value between 6 and 8.5, and a water temperature not exceeding +40°C.

4. This electric pump features a sliding bearing design and must be used in a vertical position—tilting is not permitted.

5. The submersible depth of a water-filled submersible electric pump shall not exceed 5 meters.

Product features:

1. The QS-type submersible well pump is an integrated unit consisting of a motor and a pump. It features a simple structure, convenient installation and disassembly, a small footprint, easy operation and maintenance, and safe and reliable performance.

2. The QS-type submersible pump for wells features excellent cooling performance, produces no pollution, and enhances the pump’s operational efficiency.

3. The QS-type water-filled submersible pump, due to its special structure, does not contaminate the water source during use.

 

Friendly reminder: For the performance parameters of QS-type submersible well pumps with water-filled design, please click on the → [Pump Selection] page to view them.

Why choose us?

Changsha Zhonghlian Pump Industry Co., Ltd. was founded in 1989 and was independently established after the restructuring of Changsha Water Pump Factory. It is a comprehensive national high-tech enterprise integrating design, research and development, manufacturing, and service. The company was listed on the Hunan Provincial Equity Exchange on December 31, 2019, with the abbreviation "Zhonghlian Pump Industry" and the equity code: 600275HN. It is currently a key backbone enterprise in China's centrifugal pump industry and one of the major professional manufacturers of multi-stage pumps in the country. The headquarters is located in Changsha City, Hunan Province, a historical and cultural city in China.

41000 m²

Square meters of land area

100 %

100% factory pass rate

41000 m²

Square meters of land area

100 %

100% factory pass rate

Image Name

Q

What is your typical delivery time?

A

Models in stock can be shipped the next day at the latest. All others are custom-made, with lead times generally ranging from 7 to 90 days depending on the product size and project specifics. Please contact our sales manager for details: 0731-88632200 。

Q

Do you have centrifugal pumps in stock?

A

Centrifugal pumps come in numerous models and configurations. Except for a small number of high-volume, standard models that are in stock, the vast majority are not stocked and are customized products. We need to select a pump based on your site's flow rate, head, media temperature, pH value, and installation conditions, etc., to determine the pump model and configuration before we can submit an order to the factory for production.

Q

What information should I provide when requesting a quote?

A

Generally, to obtain an accurate quotation, we recommend providing us with the following information: pump flow rate, head, on-site operating voltage and frequency, temperature, pH value, and solid particle content of the fluid being conveyed, and on-site installation conditions (horizontal or vertical installation), etc.

If you are not sure, don't worry, our business managers will assist you in determining this.

Q

What products do you mainly produce?

A

Zhonglian Pump Industry manufactures various large industrial centrifugal pumps. Main products include: self-balancing multi-stage pumps, multi-stage centrifugal pumps, single-stage centrifugal pumps, split-case pumps, chemical pumps, submersible pumps, pipeline pumps, long-shaft pumps, condensate pumps, etc.

Q

Could you help me with the selection?

A

Certainly! If the water pump model is not selected accurately, there will be big problems. If you choose a smaller one, it won't meet your needs; if you choose a larger one, it will waste electricity and fuel, increasing your costs.

Q

Why is it so slow to get a price quote?

A

Because centrifugal pumps are non-standard customized products with many models, the price range is also very large. Even for the same model, the price difference is also very large due to different materials and configurations. Taking the most common water pump accessory—the impeller—as an example, the price of a stainless steel impeller is several times that of a cast iron impeller. Therefore, we need to clarify the relevant information to give you an accurate price. Normally, if you provide relatively comprehensive information, we can quote within 5 minutes.

Product message

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.