Having 26 series -312 varieties - over 1000 pump models

Focused on water pump research and development manufacturing for 36 years

Free training for operation and maintenance personnel/free installation guidance/free provision of installation drawings

WLZ Vertical Non-Clogging Self-Priming Centrifugal Pump



classification:

Self-priming pump

keyword:

Horizontal Single-Stage Fire Pump

Product overview Product parameters Why choose us? Frequently Asked Questions

Product Overview

  The WLZ and WZY models of non-leaking vertical self-priming pumps are products independently developed by Zhonglian Pump Industry. They are widely used in industries such as petroleum, chemical engineering, metallurgy, power generation, steelmaking, mining, papermaking, electroplating, environmental protection, fire protection, construction, and wastewater treatment. These pumps can partially replace submersible pumps, long-shaft pumps, and submersible sewage pumps, as well as pumps used in applications involving frequent starts. They are suitable for conveying clean water, seawater, sewage containing small particles (but no fibrous substances), industrial wastewater, oils, and various corrosive media.

 WLZ(1)

Product Parameters

WLZ Vertical Non-Clogging Self-Priming Centrifugal Pump Performance Range and Model Specifications:

  Flow rate: 6–2200 m³/h Head: 9–100 m

  1. The temperature of the conveyed medium is less than 100℃.

  2. The volume fraction of solid particles in the conveyed medium is below 2%.

  3. The kinematic viscosity of the conveyed medium is (7–23) × 10⁻⁶ m²/s.

  4. The density of the conveyed medium is less than 1100 kg/m³.

  5. Diameter of solid particles in the conveyed medium (unit: mm):

  6. Pump port diameters: 50, 65–80, 100–125, 150–200, 250–300

  7. Particle diameter <3 <3.5 <4 <4.5 <5

  Model Description: 100WLZ(WZY)100-32FⅡ-L

  100 —— Inlet and outlet diameter 100mm

  WLZ —— Leak-free vertical self-priming pump

  WZY —— Bottom-suction, Leak-free Vertical Self-priming Pump

  100 —— Design flow rate: 100 m³/h

  32 —— Design head of 32 m

  F —— Uses a secondary impeller seal

  II – Material Category II (Category I is not labeled)

  L —— Submerged depth in mm

Structural features of the WLZ vertical non-clogging self-priming centrifugal pump:

  Compared with the WFB non-clogging self-priming pump, the WLZ (WZY) self-priming pump boasts significant technical advantages:

  1. The pump impeller features a closed-loop design, achieving an efficiency 10% to 15% higher than that of the open-loop impeller used in the WFB non-clogging self-priming pump. For pumps with identical performance parameters, the motor power required is typically one grade lower, resulting in significant energy savings. Additionally, the impeller exhibits excellent cavitation resistance, and the allowable suction lift during installation is 0.5 to 1 meter deeper than that for the WFB pump.

  2. The pump’s self-priming function employs a “multi-channel blade-type gas-water mixing and separator (self-priming disc),” which boasts the outstanding feature of rapidly completing the self-priming process. Compared to the WFB-type pump, which uses a single volute-type pressurized chamber for self-priming, this design reduces the self-priming time by more than one-third to one-half. Moreover, the pump features a compact size and light weight.

  3. There are two types of inlet configurations: The WLZ pump features a pipeline-type structure, allowing its inlet and outlet to be connected and discharged in any orientation within a 360° plane. The WZY pump adopts a bottom-suction design, with its discharge outlet capable of discharging in any direction within a 270° plane. When maintaining or repairing these pumps, there is no need to dismantle the inlet and outlet pipelines. In particular, the WZY model occupies a smaller footprint, thereby reducing capital investment in infrastructure.

  4. The sealing system employs a multi-surface, ring-type hydrodynamic seal consisting of an auxiliary impeller seal and a shutdown seal. The WFB vertical self-priming pump with hydrodynamic seal does not have a dedicated shutdown seal and is therefore not suitable for applications involving frequent starts.

  5. The connection method is a rigid direct coupling between the pump and the motor. When viewed from the motor end, the pump rotates clockwise.

  6. Unlike WFB pumps, the pump’s inlet does not require auxiliary devices such as check valves or electromagnetic vacuum breakers. Instead, it features a special U-shaped pipe structure with an air-balancing hole that automatically breaks the siphon effect. When the pump is shut down, the siphon action cannot empty the liquid stored inside the pump. Therefore, once the pump is filled with liquid during its initial operation, no further liquid needs to be added during subsequent operations—truly achieving “fill once, use for life.”

  7. The pump can be equipped with a control cabinet that features multiple functions, including automatic start-up and shut-down based on liquid levels and overload alarms, enabling unmanned operation and automatic functioning.

 

 Material of Parts for WLZ Vertical Self-Priming Pump

Friendly reminder: For performance parameters, please refer directly to the pump selection page.

Why choose us?

Changsha Zhonghlian Pump Industry Co., Ltd. was founded in 1989 and was independently established after the restructuring of Changsha Water Pump Factory. It is a comprehensive national high-tech enterprise integrating design, research and development, manufacturing, and service. The company was listed on the Hunan Provincial Equity Exchange on December 31, 2019, with the abbreviation "Zhonghlian Pump Industry" and the equity code: 600275HN. It is currently a key backbone enterprise in China's centrifugal pump industry and one of the major professional manufacturers of multi-stage pumps in the country. The headquarters is located in Changsha City, Hunan Province, a historical and cultural city in China.

41000 m²

Square meters of land area

100 %

100% factory pass rate

41000 m²

Square meters of land area

100 %

100% factory pass rate

Image Name

Q

What is your typical delivery time?

A

Models in stock can be shipped the next day at the latest. All others are custom-made, with lead times generally ranging from 7 to 90 days depending on the product size and project specifics. Please contact our sales manager for details: 0731-88632200 。

Q

Do you have centrifugal pumps in stock?

A

Centrifugal pumps come in numerous models and configurations. Except for a small number of high-volume, standard models that are in stock, the vast majority are not stocked and are customized products. We need to select a pump based on your site's flow rate, head, media temperature, pH value, and installation conditions, etc., to determine the pump model and configuration before we can submit an order to the factory for production.

Q

What information should I provide when requesting a quote?

A

Generally, to obtain an accurate quotation, we recommend providing us with the following information: pump flow rate, head, on-site operating voltage and frequency, temperature, pH value, and solid particle content of the fluid being conveyed, and on-site installation conditions (horizontal or vertical installation), etc.

If you are not sure, don't worry, our business managers will assist you in determining this.

Q

What products do you mainly produce?

A

Zhonglian Pump Industry manufactures various large industrial centrifugal pumps. Main products include: self-balancing multi-stage pumps, multi-stage centrifugal pumps, single-stage centrifugal pumps, split-case pumps, chemical pumps, submersible pumps, pipeline pumps, long-shaft pumps, condensate pumps, etc.

Q

Could you help me with the selection?

A

Certainly! If the water pump model is not selected accurately, there will be big problems. If you choose a smaller one, it won't meet your needs; if you choose a larger one, it will waste electricity and fuel, increasing your costs.

Q

Why is it so slow to get a price quote?

A

Because centrifugal pumps are non-standard customized products with many models, the price range is also very large. Even for the same model, the price difference is also very large due to different materials and configurations. Taking the most common water pump accessory—the impeller—as an example, the price of a stainless steel impeller is several times that of a cast iron impeller. Therefore, we need to clarify the relevant information to give you an accurate price. Normally, if you provide relatively comprehensive information, we can quote within 5 minutes.

Product message

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.